xc-patents:index
X Number | Date | Inventor | City | Title |
---|---|---|---|---|
XC-1 | 1824-06-08 | Noah Cushing | Quebec City, QC Canada | Washing and fulling machine |
XC-10 | 1830-05-15 | Philip Schoolcraft | St. Armand, QC Canada | Machine for cutting timber into sidings, slap-boards, shingles, lathe, &c., &c. |
XC-12 | 1830-06-25 | Robert Hoyle | Lacolle, QC Canada | Improved hydraulic steam engine |
XC-48 | 1839-06-13 | Zebediah Sisson | Montreal, QC Canada | Improved planing and matching machine |
XC-50 | 1839-12-04 | William Nunns | Montreal, QC Canada | Certain new and useful improvements in the construction of steam engines |
XC-81 | 1845-09-10 | James McKay | Stanstead, QC Canada | New and improved steam engine |
XC-83 | 1845-10-10 | Alexis Hébert | Napierville, QC Canada | New and improved sawing machine |
XC-85 | 1845-11-10 | Benjamin F. Tibbets | Montreal, QC Canada | New and improved steam engine |
XC-97 | 1846-08-10 | Charles Midgley | Montreal, QC Canada | New method of constructing planing machines for planing boards, planks, &c. |
XC-126 | 1848-04-12 | James Bailie | Aylmer, QC Canada | Improvement in the construction of saw gates for saw mills |
XC-127 | 1848-06-19 | John Ritchie | Etchemin, QC Canada | Method of constructing saw mills for slabbing logs and sawing slabs |
XC-132 | 1848-08-10 | Charles Midgley | Montreal, QC Canada | New and improved paddle wheel for steam and horse-boats, and for propelling vessels |
XC-144 | 1832-06-27 | Zebediah Sisson | Cobourg, ON Canada | Machine for planing and grooving flooring |
XC-146 | 1833-11-21 | Ambrose Foster | Kingston, ON Canada | An improvement in the steam engine, called the re-acting engine |
XC-152 | 1835-04-28 | William M. Jackson | Kingston, ON Canada | A certain apparatus to be attached to saw mills |
XC-155 | 1835-03-25 | Lyman Judson | Yonge, ON Canada | Machine for planing, jointing, grooving, tongueing, bevelling, rebating, beding, and otherwise preparing for immediate use boards, plank, and other description of timbers |
XC-160 | 1839-05-10 | Duncan Scrimger | Dumfries, ON Canada | A new method of applying lever to the working gear of saw mills |
XC-165 | 1840-08-21 | James Ainslie | Galt, ON Canada | Ainslie's clay slate and Ainslie's clay slate machine |
XC-170 | 1842-01-13 | Charles Maitland Tate | Kingston, ON Canada | An improved method of giving motion and efficacy to the propellor in steam boats and other vessels |
XC-171 | 1842-01-21 | Charles Maitland Tate | Kingston, ON Canada | An improved method of constructing cambs for the purpose of opening the cut-off, or other valves of steam engines |
XC-172 | 1842-01-27 | Charles Maitland Tate | Kingston, ON Canada | A new method of tanning hides or skins |
XC-173 | 1842-01-27 | Charles Maitland Tate | Kingston, ON Canada | A new and improved method of extracting the tannin from bark |
XC-177 | 1842-05-16 | Thomas Dissett | Portsmouth Harbour, Kingston, ON Canada | A new and improved method of laying down marine railways |
XC-182 | 1843-02-20 | Asa H. Hough | Kingston, ON Canada | Improvement upon a newly constructed suction and forcing pump |
XC-183 | 1843-03-31 | William Creighton | Niagara, ON Canada | Improvement in the rotary steam engine |
XC-193 | 1844-05-30 | William McCall | Dumfries, ON Canada | Mode by which power, to be derived from the use of the wheel and screw, may be applied to any kind of machinery |
XC-195 | 1844-06-29 | John Hearle | Galt, ON Canada | Improved engine pump, or fire engine |
XC-199 | 1845-07-16 | Lewis Ives | Kingston, ON Canada | An improved capstan for leading and unloading merchandise, or timber, from vessels, denominated “Ives' connected capstan.” |
XC-200 | 1845-07-19 | Lewis Ives | Kingston, ON Canada | An improved method of leading and unloading timber vessels, denominated “Ives' improved method of loading and unloading vessels.” |
XC-229 | 1847-05-01 | Jason C. Gillett | Sandwich, ON Canada | Improved machine for cutting shingles, staves, veneers, &c. |
XC-234 | 1847-07-19 | Peter R. Beaupre | Kingston, ON Canada | Improvements in the manner of making, using, and working a lifting and floating marine dock |
XC-241 | 1848-05-26 | John McMichael | Dumfries, ON Canada | Stump-extracting machine |
XC-242 | 1848-06-28 | John Helm | Cobourg, ON Canada | Certain improvements in the construction of mills for the manufacture of lumber with circular saws |
XC-249 | 1848-08-01 | Nathan Wharton | Johnstown, QC Canada | New process for tempering and hardening the teeth of saws used for milling and other purposes |
XC-253 | 1849-01-27 | Charles Midgley | Montreal, QC Canada | New and improved paddle wheel for steam and horse-boats, and for propelling vessels |
XC-256 | 1849-05-05 | John Baird | Toronto, ON Canada | Improvements in the arrangement and construction of the steam engine |
XC-259 | 1849-08-02 | Charles Midgley | Montreal, QC Canada | Improved hinge |
XC-260 | 1849-08-13 | Charles Midgley | Montreal, QC Canada | Improved accoucheur's (male midwife's) assistant |
XC-265 | 1849-09-28 | John Winger | Berlin, ON Canada | Reaction pump |
XC-267 | 1849-08-13 | Charles Midgley | Montreal, QC Canada | Saw mill |
XC-285 | 1850-05-25 | Alexander Fleck | Montreal, QC Canada | New and improved plough or subsoil grubber |
XC-288 | 1850-06-27 | James Trehearne | Toronto, ON Canada | A new method of constructing saw mills for sawing timber |
XC-291 | 1850-04-02 | William R. Seaver | Montreal, QC Canada | Improved stave dresser |
XC-292 | 1850-04-02 | William R. Seaver | Montreal, QC Canada | Improved stave jointer |
XC-299 | 1850-11-02 | Charles Midgley | Montreal, QC Canada | A new and useful machine called a Spark Killer and Heat Retainer |
XC-309 | 1851-01-31 | John Hearle | Galt, ON Canada | Improvement in engine pumps and fire engines |
XC-323 | 1851-05-21 | Chester Shattuck | Durham, ON Canada | Cross cutting machine |
XC-327 | 1851-06-16 | Edwin Jenney | Sandwich, ON Canada | A new and useful machine for cutting and sawing staves with unprecedented rapidity and correctness |
XC-332 | 1851-07-04 | George Hawley | Eaton, QC Canada | Shingle making machine |
XC-334 | 1851-08-24 | James Trehearne | Port Dover, ON Canada | A new method of running the perpendicular saw for sawing timber |
XC-339 | 1851-11-06 | William Coleman | Toronto, ON Canada | Circular and straight moulding, rabbetting, ploughing and architrave machine |
XC-340 | 1851-11-06 | Peter Rothwell | Toronto, ON Canada | A new and important machine for the manufacture of laths |
XC-351 | 1852-03-20 | Charles Dawson | Cobourg, ON Canada | Improvements in the manner of working muley saws and the machinery attached thereto |
XC-363 | 1852-08-10 | Robert Might | Cavan, ON Canada | R. Might's portable horizontal and self-acting sawing machine |
XC-368 | 1852-08-31 | Thomas J. Fuller | Toronto, ON Canada | Improvement in muley saw mills |
XC-379 | 1852-10-27 | Charles Midgley | Montreal, QC Canada | An improved churn |
XC-380 | 1852-10-27 | Charles Midgley | Montreal, QC Canada | An improved bee hive |
XC-385 | 1853-01-26 | William Allchin | Paris, ON Canada | Improved scythe holder |
XC-389 | 1853-03-07 | Aretus Andrews Wilder | Sandwich, ON Canada | Machine for planing, tongueing and grooving boards |
XC-401 | 1853-04-29 | Edmond Richard | St. Roch, QC Canada | Machine for sawing straight and crooked wood of equal and unequal dimensions |
XC-405 | 1853-04-29 | Asph Buck Kent | West Oxford, ON Canada | Self-gigging, self-setting, and self-regulating saw mill |
XC-409 | 1853-05-11 | Daniel Smith Merritt | Houghton, ON Canada | New and improved carriage and feeding and gigging back works for steam and water saw mills |
XC-411 | 1853-06-11 | Benjamin F. Tibbetts | Quebec City, QC Canada | Improved mode of constructing steam engines |
XC-415 | 1853-06-20 | Jackson McIntyre | Kingston, ON Canada | File cutting machine |
XC-419 | 1853-07-20 | Alexander Solomon Walbridge | Stanbridge, QC Canada | Machine for sawing and planing all lumber by one operation |
XC-457 | 1854-06-06 | Benjamin Wait | Willoughby, QC Canada | A combination of machinery for the making of barrels, kegs, tubs and other bilge works |
XC-465 | 1854-07-13 | Richard Muchall | Hamilton, ON Canada | Machine for working irregular surfaces, so as to form a piece of timber to any required shape |
XC-482 | 1854-11-08 | Charles H. Waterous | Brantford, ON Canada | Machine for making nuts and washers from a heated bar of metal |
XC-489 | 1854-12-06 | James Blanchfield Smith | North Cayuga, ON Canada | Improvement in the construction of portable or stationary steam or water saw mills |
XC-494 | 1855-01-20 | J. Overhold | Blandford, ON Canada | Horizontal sawing machine for cross-cutting logs of wood |
XC-504 | 1855-03-22 | Reuben P. Benton | Toronto, ON Canada | Improvements in machinery for manufacturing waggon spokes and other articles irregular in their form |
XC-530 | 1855-04-10 | Charles S. Rodier | Montreal, QC Canada | Machine for sawing wood |
XC-535 | 1855-07-25 | R. Might | Millbrook, ON Canada | Portable vibrating and self-acting circular sawing machine |
XC-552 | 1855-09-19 | Charles W. Coe | Sandwich, ON Canada | Machine for drilling holes (and other operations) in metals |
XC-570 | 1855-12-03 | A. Kendall | Windsor, ON Canada | New machine for making shingles |
XC-576 | 1855-12-11 | James McLennan | Windsor, ON Canada | Machine for repairing iron rails |
XC-582 | 1855-12-24 | Charles H. Waterous | Brantford, ON Canada | Useful improvements in the construction of steam and water circular saw mills |
XC-589 | 1856-02-11 | W. F. Adams | Toronto, ON Canada | New semi-revolving cylinder steam engine |
XC-596 | 1856-01-17 | W. B. Choate | Galt, ON Canada | Improvement in the manufacture of lanterns |
XC-604 | 1856-02-19 | Charles H. Gould | Montreal, QC Canada | Improved planing machine |
XC-605 | 1856-03-05 | E. Hedley | Toronto, ON Canada | New and improved method of constructing shingle machines |
XC-612 | 1856-03-20 | Thomas Ritchie | Dumfries Township, ON Canada | Improvement in the draft applied to reaping, mowing or other machines |
XC-613 | 1856-03-27 | H. Huff | Cobourg, ON Canada | New and useful machine for dovetailing in cabinet making |
XC-614 | 1856-03-27 | H. Huff | Cobourg, ON Canada | Machine for dovetailing in cabinet making |
XC-615 | 1856-03-27 | H. Fowler | Belleville, ON Canada | Reciprocating engine |
XC-620 | 1856-04-05 | J. Davis | Hamilton, ON Canada | Slabbing and rolling gang of circular saws for sawing lumber or round logs into boards or planks |
XC-623 | 1856-04-14 | S. Pettet | Pickering, ON Canada | Horizontal rotary shingle machine |
XC-625 | 1856-04-22 | E. E. Gilbert | Montreal, QC Canada | New and improved machine for sawing, called by him Gilbert's Steam Sawyer |
XC-628 | 1856-04-30 | W. Gill | Dundas, ON Canada | Improvement on steam engines by variable cut off and expansion gear for stationary or marine engines |
XC-634 | 1856-05-23 | J. M. Thompson | Esquesing, ON Canada | New and improved method of hanging a mully saw |
XC-635 | 1856-05-30 | P. Bauman | Preston, ON Canada | Improved portable cider mill and press |
XC-644 | 1856-07-15 | N. Davis | Smithville, ON Canada | Self-regulating sawmill |
XC-653 | 1856-08-27 | E. E. Supper | Cayuga, ON Canada | Shingle machine |
XC-659 | 1856-06-13 | R. Romaine | Peterborough, ON Canada | Introduction into Canada of a “French Machine for Bending Wood” |
XC-673 | 1856-10-29 | R. Romaine | Peterborough, ON Canada | Improved machine for bending wood or other substances |
XC-694 | 1857-01-19 | B. Wait | Etobicoke, ON Canada | Cylindrical saw auger, for boring wooden tubes for pumps, water courses, &c. |
XC-698 | 1857-01-21 | J. Gartshore | Dundas, ON Canada | Improvements in the construction of smut machines |
XC-702 | 1857-02-12 | W. Gill | Waterdown, ON Canada | Improvements in the construction of steam engines |
XC-707 | 1857-02-23 | U. Haskin | Oshawa, ON Canada | Self-acting cylindrical lathe |
XC-721 | 1857-04-07 | D. T. Curtis | Port Perry, ON Canada | New method of clamping frames, &c., by the double action eccentric lever clamp |
XC-725 | 1857-04-22 | S. S. Hickock | Whitby, ON Canada | New and improved shingle cutting machine |
XC-726 | 1857-04-28 | H. L. Beverly | Toronto, ON Canada | New and improved shingle cutting machine |
XC-728 | 1857-05-04 | J. Cant | Galt, ON Canada | New moveable scaffold |
XC-734 | 1857-05-12 | U. Haskins | Oshawa, ON Canada | New and improved rotary steam engine |
XC-767 | 1857-08-19 | G. Campbell | Toronto, ON Canada | “Hecla” portable forge |
XC-769 | 1857-08-20 | G. Cummings | Niagara, ON Canada | Improved steam engine slide valve |
XC-775 | 1857-09-15 | W. R. Bowen | Cramahe, ON Canada | Feed works to be used in saw mills called Bowen's Rotary re-action Feed Works |
XC-778 | 1857-09-15 | Charles Fanner | Smithville, Grimsby Township, ON Canada | Sawing machine |
XC-784 | 1857-10-12 | H. Yates | Brantford, ON Canada | Improvement in the fire box of the boilers of locomotives, or other steam engines |
XC-785 | 1857-10-12 | H. Yates | Brantford, ON Canada | Improvement in the consumption of sparks and parts of unconsumed fuel in locomotives and other steam engines |
XC-790 | 1857-11-06 | H. Yates | Brantford, ON Canada | Improved perforated fire grate, feed water heater and damper combined, for locomotives and other steam engines |
XC-791 | 1857-11-06 | P. Parkes | Yorkville, ON Canada | Steam press for making brick |
XC-792 | 1857-11-06 | Charles R. Parkes | Yorkville, ON Canada | Brick drain pipe and tile making machine |
XC-793 | 1857-11-06 | W. H. Tuttle | Canfield, ON Canada | New and improved auger handle |
XC-794 | 1857-11-06 | W. Manning | Montreal, QC Canada | Machine for cutting or tuning out heads for barrels, kegs, casks, or any description of coopers' works |
XC-808 | 1857-12-15 | A. Cant | Galt, ON Canada | New root cutting machine |
XC-831 | 1858-04-07 | H. Clarke | Thamesford, ON Canada | Improved machine for cross-cutting logs, cutting firewood, &c. |
XC-835 | 1858-05-14 | Charles Green | Brantford, ON Canada | Separating thrashing machine |
XC-837 | 1858-05-14 | I. W. Forbes | Windsor, ON Canada | Combined rocking stave and heading machine |
XC-840 | 1858-06-08 | H. Yates | Brantford, ON Canada | Improvements in the wing rails of railway carriages |
XC-847 | 1858-07-02 | Alexander Solomon Walbridge | Stanbridge, QC Canada | Improved method of bending timber |
XC-853 | 1858-07-13 | A. N. Cole | Brockville, ON Canada | Instrument, called Cole's Gravitating Plumb and Level |
XC-860 | 1858-07-26 | J. Thirkell | Ingersoll, ON Canada | New and improved method of constructing sawing machines |
XC-889 | 1858-11-03 | Philip C. Van Brocklin | St. Catharines, ON Canada | Improvements in the construction and operation of pumps for raising fluids |
XC-890 | 1858-11-03 | J. Noble | St. Catharines, ON Canada | Machinery for making axes |
XC-910 | 1858-12-31 | E. E. Gilbert | Montreal, QC Canada | Improved steam boiler |
XC-923 | 1859-03-01 | Venuste Girardin | Bell Riviere, ON Canada | A fluent equilibrating slide valve for locomotives and steam engines |
XC-932 | 1859-03-24 | James Law | Scarborough, ON Canada | Law's shingle and barrel heading sawing machine |
XC-970 | 1859-06-22 | George White | New Market, ON Canada | An improved machine for drilling iron and other metals |
XC-1003 | 1859-10-26 | Ananias Smith | Toronto, ON Canada | A new method of constructing lathes for turning regular or irregular surfaces |
XC-1004 | 1859-10-31 | Henry Yates | Brantford, ON Canada | A variable and double annular blast apparatus for locomotives and other steam engines |
XC-1016 | 1859-12-01 | Thomas Sadler | North Dorchester, ON Canada | A new and improved sawing machine, called Willard Eastwood's New and Improved Sawing Machine |
XC-1038 | 1860-02-18 | William Williamson | Smith's Falls, ON Canada | A certain barrel head machine |
XC-1039 | 1860-02-24 | George McKenzie | Goderich, ON Canada | A certain bush engine |
XC-1044 | 1860-01-27 | Charles H. Waterous | Brantford, ON Canada | An improvement in the application of steam power, and in the manner of making such application, for the purposes of moving and working steam ploughs, steam fire engines, &c., &c., &c. |
XC-1053 | 1860-03-13 | Charles Henry Wortman | Colbrook, ON Canada | An improved eaves trough machine |
XC-1065 | 1860-02-25 | Philip C. Van Brocklin | Brantford, ON Canada | Expansive tubular stove, or fire box |
XC-1077 | 1860-04-29 | Philip C. Van Brocklin | Brantford, ON Canada | Combined seed drill cultivator and horse hoe |
XC-1083 | 1860-01-25 | Alexander F. Ward | Camden, Kent County, ON Canada | A self-acting anti-friction steam slide valve |
XC-1087 | 1860-05-09 | John C. Park | Brantford, ON Canada | Combined machine for welding, and otherwise repairing the iron rails |
XC-1092 | 1860-05-09 | Thomas Nicol | Whitby, ON Canada | A portable cross-cut sawing machine, with parallel movements |
XC-1094 | 1860-05-09 | Henry Yates | Brantford, ON Canada | An improvement in machinery for coupling, shaping and renewing the surfaces of metal bars |
XC-1105 | 1865-06-14 | Abraham Kerby | Brantford, ON Canada | Self-acting and detaching car coupling |
XC-1117 | 1860-07-06 | Charles Meadows | East Zorra, ON Canada | An improved machine for sawing firewood from the log |
XC-1125 | 1860-08-02 | Henry Yates | Brantford, ON Canada | An improved perforated fire grate, feed water heater, and damper combined, for steam engines |
XC-1141 | 1860-09-25 | Charles H. Waterous | Brantford, ON Canada | A new mode of packing and preserving hops |
XC-1152 | 1860-10-04 | Matthew Moody | Terrebonne, QC Canada | An accommodating joint working on two centre bearings, applied to mowing and reaping machines |
XC-1164 | 1860-12-21 | Elijah Leonard | London, ON Canada | A sawing machine for cross-cutting timber |
XC-1165 | 1860-12-21 | John D. Lawlor | Fort Erie, ON Canada | An improved sawing machine |
XC-1167 | 1860-12-21 | Joseph Marks | Hamilton, ON Canada | Lubricating valves, piston, cylinders, piston rods and valve spindles of locomotives and other engines |
XC-1185 | 1861-02-01 | Sylvester Skinner | Gananoque, ON Canada | A machine for bending hame timber, plough handles, &c., by end pressure |
XC-1201 | 1861-03-04 | Charles H. Waterous | Brantford, ON Canada | Water drawer |
XC-1206 | 1861-04-04 | Hubbard Joslyn | Stanstead, QC Canada | Joslyn's Improved Clothes Wringer |
XC-1211 | 1861-02-06 | James McLennan | Windsor, ON Canada | Machine for repairing iron rails |
XC-1217 | 1861-03-21 | Albert O. Fuller | Erin, ON Canada | A new and portable labour saving machine for cutting mortices in carriage and all other hubs by hand |
XC-1219 | 1861-05-08 | Richard Smith | Sherbrooke, QC Canada | An improved extension auger |
XC-1224 | 1861-05-08 | G. H. Hinton | Montreal, QC Canada | Improvements in the manufacture of saws |
XC-1230 | 1861-04-10 | Alexander Young | Smith's Falls, ON Canada | An improved reaper attachment |
XC-1231 | 1861-04-10 | George Ives | Windsor, ON Canada | An improved saw horse |
XC-1236 | 1861-06-03 | E. S. Perkins | Montreal, QC Canada | A new and useful improvement in the ordinary two arm saw set |
XC-1251 | 1861-07-30 | Charles R. Parkes | Yorkville, ON Canada | Improved churn |
XC-1254 | 1861-07-09 | Adam Young | Crowland, ON Canada | An improved mill saw |
XC-1257 | 1861-07-17 | David Bruce | London, ON Canada | An improved sawing machine |
XC-1261 | 1861-07-17 | Isaac Dolbry | York, ON Canada | A new and improved lath cutting machine |
XC-1287 | 1861-12-18 | Stillman Ray | Stanstead, QC Canada | Ray's improved tub and pail machines |
XC-1291 | 1861-11-28 | Alexander S. Walbridge | Bedford, QC Canada | An improved mode of operating variable expansion steam cut-off valves |
XC-1299 | 1861-11-29 | William McDougall | York, ON Canada | A self-acting brake for sawing machines |
XC-1302 | 1861-11-29 | Philip C. Van Brocklin | Brantford, ON Canada | Improved grain drill cultivator and horse hoe |
XC-1341 | 1861-03-11 | Philip C. Van Brocklin | Brantford, ON Canada | Van Brocklin's Two Horse Wheeled Cultivator |
XC-1358 | 1862-04-15 | James Dalgamo | Chatham, ON Canada | An instantaneous adjustment wrench |
XC-1361 | 1862-06-18 | Hollis Clark | Barnston, QC Canada | A new sawing machine |
XC-1372 | 1862-06-06 | Charles H. Waterous | Brantford, ON Canada | A centripetal churn and centripetal agitator, for refining and fitting for use rock oil, or petroleum and coal oil |
XC-1375 | 1862-06-09 | Thomas Northey | Hamilton, ON Canada | An improved expansion steam engine |
XC-1392 | 1862-07-08 | Charles H. Waterous | Brantford, ON Canada | Improved machine for manufacturing the shoes of horses and other animals |
XC-1413 | 1862-08-22 | Abiel O'Dell | Bowmanville, ON Canada | A saw set and clamp, called O'Dell's portable combined saw set and saw clamp |
XC-1416 | 1862-08-25 | Francis Cant | Galt, ON Canada | Improved cam for working the under-need or catch-pin of sewing machines |
XC-1433 | 1862-09-15 | Edward Holmes | Hamilton, ON Canada | A new and improved stave dressing machine |
XC-1434 | 1862-09-15 | Edward Holmes | Hamilton, ON Canada | Improvements in machine for jointing staves |
XC-1435 | 1862-09-15 | Edward Holmes | Hamilton, ON Canada | New and improved hoop driving and stave crozing machine |
XC-1451 | 1862-10-24 | Charles Powell | York Township, ON Canada | Improved double action swing force pump |
XC-1462 | 1862-11-25 | Thomas Morris | Brantford, ON Canada | Morris's rail repairing machine |
XC-1469 | 1862-12-09 | William Randall | Uxbridge, ON Canada | A new and useful improvement in saw mills, called “The Excelsior Saw Mill” |
XC-1476 | 1863-01-12 | Valentine Mitchell | Cavan, ON Canada | Wood cutting machine |
XC-1482 | 1863-01-12 | Sylvester Day | Brantford, ON Canada | Two wheeled hay rake |
XC-1485 | 1863-01-21 | Donald Murray | St. Mary's, Perth County, ON Canada | An improved wood sawing machine |
XC-1518 | 1863-04-10 | William Saxon Arnold | Chatham, ON Canada | An improvement in a wood sawing machines, being a crank attached to a pitman of the saw and a self-adjusting gauge for raising or lowering the saw when in motion |
XC-1521 | 1863-04-17 | Freeman Clark Noxon | Bloomfied, Prince Edward County, ON Canada | Improved cultivator |
XC-1541 | 1863-06-04 | Malhew Milward | Cifton, ON Canada | Improvements in wood sawing machines |
XC-1543 | 1863-06-09 | William Thomas | London, ON Canada | The locomotive crosscut sawing machine |
XC-1545 | 1863-06-17 | Israel Kinney | Brantford, ON Canada | Motive power |
XC-1564 | 1863-06-18 | John Walmsley | Berlin, ON Canada | Agricultural implement for pulvering and cleaning the soil and casting seed and other substances thereon |
XC-1577 | 1863-07-31 | Marshall McKay | London, ON Canada | A slat splitting machine |
XC-1580 | 1863-08-06 | William Driscoll | Merrickville, ON Canada | A double crank churning and horizontal boring machine |
XC-1596 | 1863-10-02 | Daniel Shepard | Waterdown, ON Canada | Stave cross cutter |
XC-1616 | 1863-11-23 | Samuel Smith | Acton, ON Canada | Improved machine for the jointing of staves for barrels, called “Smith's stave-jointer” |
XC-1619 | 1863-11-24 | Cyrenius Chapin Roe | Brantford, ON Canada | Horse power, called the “Canadian Horse Power” |
XC-1623 | 1863-11-24 | Thomas Bletcher | Peterborough, ON Canada | Wood sawing machine |
XC-1650 | 1864-02-11 | Hugh Cant | Galt, ON Canada | Improved form or description of steam engine, called “Cant's rotary engine” |
XC-1662 | 1864-03-16 | Alexander McCarter | Walkerton, ON Canada | A new and useful improvement in boxing-machine for carriage and waggon wheels |
XC-1667 | 1864-04-04 | Elijah Leonard | London, ON Canada | Improved sawing machine for the cross cutting of timber |
XC-1680 | 1864-04-22 | Joseph Paradis | Montreal, QC Canada | New and improved escapement hammer |
XC-1692 | 1864-05-02 | Samuel Noxon | Ingersoll, ON Canada | Cultivator, called “Noxon's Cultivator” |
XC-1715 | 1864-06-17 | John Vandyke | Grimsby, ON Canada | Boring machine |
XC-1718 | 1864-06-21 | Isaac Ireland | Mount Forest, ON Canada | Combined hoop and lath machine |
XC-1730 | 1864-08-16 | Samuel Malpuss | Middleton Centre, ON Canada | Shingle-jointer |
XC-1743 | 1864-09-27 | Joseph Thayer | Belleville, ON Canada | Guide-head for lathes, called “Thayer's eccentric guide-head” |
XC-1759 | 1864-11-18 | John Hanford | Windsor, ON Canada | Improved saw-setter, to be known as “Hanford's saw-setter” |
XC-1762 | 1864-11-21 | Henry Fryatt | Aurora, ON Canada | Improved sawing machine |
XC-1770 | 1864-08-16 | Samuel Malpuss | Middleton Centre, ON Canada | New and useful shingle-jointer |
XC-1775 | 1864-12-10 | James E. Mitchell | Paris, ON Canada | Matching machine, to be called “Mitchell's non-paralleled matching machine” |
XC-1776 | 1864-11-29 | George Lacey Darling | Simcoe, ON Canada | Machine to be called “Darling's Lever Power and Vertical Sawing Machine” |
XC-1792 | 1865-02-08 | David Bruce | London, ON Canada | Improved sawing machine |
XC-1796 | 1865-02-15 | John Ritchie | Etchemin, QC Canada | Machine for holding saw logs, to be called “Ritchie's patent attached sawmill chairs” |
XC-1824 | 1865-04-17 | William Hockin | Guelph, ON Canada | Stave chamfering and crozing machine |
XC-1849 | 1865-06-20 | John W. Terwilliger | Ameliasburg, ON Canada | Auger, called “the Farmer's Easy Borer” |
XC-1850 | 1865-06-26 | Samuel Smith | Guelph, ON Canada | Machine for cutting the locks of barrel and other hoops, to be called “Smith's Hoop Locking Machine” |
XC-1893 | 1865-09-12 | Samuel Smith | Guelph, ON Canada | Smith's improved combined Stave Machine |
XC-1900 | 1865-09-23 | James Kerr | Galt, ON Canada | Grain separator, called “Kerr's improved Grain Separator” |
XC-1927 | 1865-11-25 | Charles Taylor | Bonaventure, QC Canada | Machine for deepening and sharpening the teeth of saws |
XC-1948 | 1866-01-31 | D'Arcy Porter | Toronto, ON Canada | Improvement in rip saws |
XC-1961 | 1866-02-23 | Charles H. Waterous | Brantford, ON Canada | Improvement in the steam engine, known as “Waterous' Combined Portable and Stationary Engine” |
XC-1987 | 1866-02-23 | James Charles Fitzgerald | Aurora, ON Canada | Improved sawing machine |
XC-1994 | 1866-02-28 | James Chase | Brooklin, ON Canada | Wood lathe attachment |
XC-2016 | 1866-04-13 | Charles Powell | York Township, ON Canada | Rod coupling or joint for securing and fastening together wood or iron rods for pumps or other purposes |
XC-2036 | 1866-05-03 | Edward Miall | Oshawa, ON Canada | Dove-tailing machine, called “Miall's Dove-tailer” |
XC-2083 | 1866-08-31 | Joseph William Robinson | Bridgewater, ON Canada | Axe-Rolling and swagging machine for making chopping axes |
XC-2099 | 1866-09-13 | Parley Jabez Ayres | Peterborough, ON Canada | Auger handle, called “Ayres' magic Auger-Handle” |
XC-2101 | 1866-09-13 | Parley Jabez Ayres | Peterborough, ON Canada | Tire upsetting machine, called “Ayers' improved Tire upsetting Machine” |
XC-2116 | 1866-09-19 | Edward B. Meyer | Quebec, QC Canada | Improvements in drilling machines |
XC-2146 | 1866-11-07 | James William Davis | Galt, ON Canada | A mould board, called “The Maple Leaf” |
XC-2149 | 1866-11-12 | Matthew T. Wyatt | Quebec, QC Canada | Butting Machine |
XC-2150 | 1866-11-13 | Matthew T. Wyatt | Quebec, QC Canada | Combined Butting, Splitting, and Lath making Saw Bench |
XC-2220 | 1867-01-25 | B. H. Rose | Unknown, Unknown Canada | Improvement in the cross cut saw and buck saw respectively |
XC-2228 | 1867-02-02 | Michael Stevenson | St. Mary, Perth County, ON Canada | Drilling machine, called “A double hold hand drilling machine for Railroad Iron” |
XC-2282 | 1867-03-20 | Robert Lockhart | Walkerton, ON Canada | Hub and felloe boring machine for the use of wheel-wrights |
XC-2283 | 1867-03-20 | Robert Lockhart | Walkerton, ON Canada | Self centering face sett for the use of wheelwrights |
XC-2306 | 1867-04-16 | Francis Baker | Kilbride, Halton County, ON Canada | Rotary and non-exhaust Steam Engine |
XC-2321 | 1867-04-23 | Robert Thompson | Oro, Simcoe County, ON Canada | Log elevator |
XC-2339 | 1867-05-13 | John McIntyre | Windsor, ON Canada | Lateral Saw, called “McIntyre's Patent Lateral Saw” |
XC-2354 | 1867-06-06 | James Chase | Brooklin, ON Canada | Barrel head turner |
XC-2357 | 1867-06-06 | James Chase | Brooklin, ON Canada | Shingle and heading sawing machine |
XC-2359 | 1867-05-13 | William Hartley | Mount Forest, ON Canada | Sawing machine |
XC-2378 | 1867-06-26 | Gilbert Marcus Hoskings | London, ON Canada | Foot morticing machine |
XC-2383 | 1867-06-28 | Charles Powell | Newton, ON Canada | Improvements to pumps and hose attachments to pumps |
XC-2396 | 1867-06-28 | Samuel H. Cain | Windsor, ON Canada | Motion for vertical saw, or method of giving an upright saw (single or gangs,) the oscillating, reciprocating or whip saw or rocking motion |
XC-2401 | 1868-01-03 | William Owen | Toronto, ON Canada | Reversible rotary steam engine |
XC-2416 | 1868-01-11 | William Clements | Newbury, ON Canada | Veneer knife |
XC-2458 | 1868-01-23 | William B. Choate | Galt, ON Canada | Heat radiator |
XC-2481 | 1868-02-04 | Henry Yeager | Berlin, ON Canada | Improved combination water wheel, called “The Empire Water Wheel” |
XC-2517 | 1868-03-09 | Thomas West Sparrow | Galt, ON Canada | Self-adjusting rain water conductor |
XC-2528 | 1868-03-13 | Alexander Field Ward | Gore of Camden, ON Canada | Steam engine and frame combined with improved valve gear for cross-cutting logs |
XC-2535 | 1868-03-17 | Charles Edward Michaud | Ottawa, ON Canada | Steam turbine and rotary engine, called “Turbine-Vapeur-Michaud” |
XC-2538 | 1868-03-23 | Simion Sherman | Vankleek Hill, ON Canada | Apparatus for boring the hubs of wheels, called “Sherman's Hub Boring Apparatus” |
XC-2558 | 1868-04-06 | Thomas Dunham Finnigan | Quebec City, QC Canada | Rotary steam engine, called “The Improved Rotary Steam Engine” |
XC-2560 | 1868-04-08 | James Paton Clarke | Yorkville, ON Canada | The Domestic Saw Mill |
XC-2561 | 1868-04-08 | Henry Thomas Walters | Ottawa, ON Canada | Forging machine |
XC-2590 | 1868-05-02 | Henry Ludwick Weagant | Morrisburgh, ON Canada | Machine for cutting slats |
XC-2608 | 1868-05-26 | Charles H. Waterous | Brantford, ON Canada | Machine for sawing logs and cants into lumber |
XC-2634 | 1868-06-18 | Cyrus Sumner Bell | Chatham, ON Canada | Combined boring and morticing machine |
XC-2635 | 1868-06-18 | John Norton | Yarmouth, ON Canada | Norton's sawing and boring machine |
XC-2696 | 1868-07-24 | Thomas Morris | Brantford, ON Canada | Morris Improved Wrench |
XC-2697 | 1868-07-24 | Jonathan Ward | Dorchester, ON Canada | Ward's Imperial Saw Tooth and Gumming |
XC-2716 | 1868-08-10 | Isaac Beadell Bowerman | South Norwich, ON Canada | The Universal Adjustable Vice |
XC-2733 | 1868-08-22 | George Washington Bentley | Pickering, ON Canada | Bentley's Saw Gummer, Grinder, and Upset |
XC-2741 | 1868-08-17 | Adam Cant | Galt, ON Canada | Cant's Air Heater |
XC-2778 | 1868-09-18 | John Leugh | Buckingham, QC Canada | Leugh's improvement in Saw Teeth and an apparatus for forming the same |
XC-2789 | 1868-09-22 | Frederick Tremble | Amherstburgh, QC Canada | The Rotary Spoke Trimmer |
XC-2801 | 1868-09-29 | Adam Kay | Galt, ON Canada | Expanding mandrel for turning lathe |
XC-2855 | 1868-12-01 | Myron Socrates Brownell | Vienna, Elgin County, ON Canada | Machine for scroll sawing |
XC-2856 | 1868-12-01 | Myron Socrates Brownell | Vienna, Elgin County, ON Canada | Furniture caster, called “The Turntable Caster” |
XC-2859 | 1868-12-01 | William Washington Farmer | Reach Township, ON Canada | Farmer's Patent Lever Saw-Set |
XC-2884 | 1868-12-02 | Robert Highet | Cobourg, ON Canada | Buck saw handle, to be called “The Canadian single or double Brace Saw Stretcher” |
XC-2897 | 1868-12-11 | Christopher Sheely | Reach Township, ON Canada | Sheely's Improved Self-Fastening Saw Handle |
XC-2907 | 1868-12-16 | Timothée Beaudry | St. Flavien Parish, QC Canada | Gang of saws with different sets |
XC-2950 | 1869-01-05 | Morris C. Lutz | Galt, ON Canada | Heater and radiator |
XC-2962 | 1869-01-14 | E. Bartlett | Bagot, ON Canada | Rotary steam engine |
XC-2987 | 1869-01-16 | R. A. Ptolemy | Tapleytown, ON Canada | Rotary steam engine |
XC-2992 | 1869-01-29 | W. Osborne | Galt, ON Canada | Art of preparing meal from wheat |
XC-2996 | 1869-01-25 | T. H. Bottomley | Toronto, ON Canada | Edge-tool grinding machine |
XC-3004 | 1869-02-06 | E. E. Gilbert | Montreal, QC Canada | Improvements on steam engines and boilers |
XC-3005 | 1869-01-08 | J. A. Buchanan | Burford, ON Canada | Portable gang circular saw mill |
XC-3021 | 1869-02-19 | W. Allchin | Paris, ON Canada | Hot air drum |
XC-3039 | 1869-02-24 | G. Brooks | Picton, ON Canada | Machine for shaving wood |
XC-3072 | 1869-03-29 | E. Totman | Hamilton, ON Canada | Horse power |
XC-3081 | 1869-03-22 | Henry Yates | Brantford, ON Canada | Method of strengthening and preserving the rails of iron and wooden railways |
XC-3088 | 1869-03-18 | T. Adams | Montreal, QC Canada | Improvements on slide valves, pistons and glands |
XC-3089 | 1869-03-24 | M. T. Wyatt | Quebec City, QC Canada | Floating saw mill |
XC-3131 | 1869-04-08 | W. Prall | Galt, ON Canada | Improvement on adjusting pinions on horse powers and other machinery |
XC-3176 | 1869-05-01 | J. Lancaster | Ottawa, ON Canada | Improvements in shingle machines |
XC-3191 | 1869-05-12 | W. Buck | Otonabee, ON Canada | Clasp for securing the blades of cross-cut saws to their handles |
XC-3202 | 1869-05-17 | D. Smith | Lakefield, ON Canada | A saw mill swedger |
XC-3207 | 1869-05-22 | Henry Yates | Brantford, ON Canada | Railway track crossing |
XC-3251 | 1869-06-07 | J. Soules | Queensville, ON Canada | Improvements on saw tangs for crosscut saws |
XC-3267 | 1869-06-11 | W. P. Bartley | Montreal, QC Canada | Improvements on steam engines and pumps |
XC-3285 | 1869-06-23 | J. Filion | St. Eustache, QC Canada | Machine for sharpening and repairing the teeth of saws |
XC-3300 | 1869-06-28 | L. Davidson | Brantford, ON Canada | Improvement in the construction and use of railroad car wheels and crossings |
XC-3302 | 1869-06-28 | S. H. Cain | Windsor, ON Canada | Improvements in saw mills |
XC-3313 | 1869-08-20 | S. Cleveland | Coaticook, QC Canada | Machine for upsetting and bending tires, punching metals and gumming saws |
XC-3321 | 1869-06-30 | L. Davidson | Brantford, ON Canada | Improvements on railway tracks |
XC-3325 | 1869-08-07 | C. Young | Windsor, ON Canada | Washing machine |
xc-patents/index.txt · Last modified: 2019/05/30 01:03 by russ